A M Water Services Forms

RPE Inspection

AMWS — RPE Inspection (FORM_RPE_INSP_01)

Pre-use inspection of tight-fitting RPE (separate from one-off fit testing).

This field is for validation purposes and should be left unchanged.

AMWS — RPE Inspection Form (FORM_RPE_INSP_01)

Ongoing pre-use inspection of tight-fitting RPE. This is distinct from the Fit Test Record (HS_FM_14) — fit testing is a one-off pass/fail certification; this form is the ongoing in-use check on the equipment itself.

Document ReferenceFORM_RPE_INSP_01 — RPE Inspection
Issue Number1
Issue Date12 May 2026
Next Review12 May 2027
Controlled BySean Ashton (HSQE Consultant, Onyx Operations)
Approved ByAaron Mason, Managing Director
StatusNew controlled document — supports SOP 8.4.
DD slash MM slash YYYY

Pre-use checks

Facepiece free of damage / distortion(Required)
Straps / harness intact and elastic(Required)
Inhalation valve(s) clean + seated correctly(Required)
Exhalation valve clean + seated correctly(Required)
Filter(s) within service life + clean(Required)
Seal check (positive pressure) — pass(Required)
Seal check (negative pressure) — pass(Required)
Wearer clean-shaven where seal contacts skin(Required)
Drop files here or
Accepted file types: jpg, jpeg, png, heic, pdf, Max. file size: 5 MB, Max. files: 5.
    JPG/PNG up to 5MB each.
    Clear Signature